ProductFunctionFamilyActivity · carriers
ENVIROQUAT 2D 50eDidecyl dimethyl ammonium chloride (C10/C10 DDAC)
EPA Reg. No. 99503-5RegisteredRegistered DDAC active for cooling-tower and process-water biocides50 %ethanol (SDA 40-B/3-C)ENVIROQUAT 2OD 80eDialkyl dimethyl ammonium chloride blend: octyl decyl 40 %, didecyl 24 %, dioctyl 16 %
EPA Reg. No. 99503-1RegisteredRegistered dialkyl-blend active for industrial water-treatment biocides80 %ethanol (SDA 40-B/3-C)ENVIROQUAT CB 80eAlkyl (50 % C14, 40 % C12, 10 % C16) dimethyl benzyl ammonium chloride (ADBAC)
EPA Reg. No. 99503-2RegisteredRegistered ADBAC active for cooling-water and industrial biocide products80 %ethanol (SDA 40-B/3-C)ENVIROQUAT MBEB 80eAlkyl dimethyl benzyl ammonium chloride 40 % / alkyl dimethyl ethylbenzyl ammonium chloride 40 %
EPA Reg. No. 99503-3RegisteredRegistered dual-quat active for broad-spectrum water-treatment biocides80 %ethanol (SDA 40-B/3-C)ENVIROQUAT 2D 80eDidecyl dimethyl ammonium chloride (C10/C10 DDAC)
EPA Reg. No. 99503-6Under EPA reviewHigh-active DDAC manufacturing-use product, in EPA review80 %ethanol (SDA 40-B/3-C)ENVIROQUAT CB 50eAlkyl (50 % C14, 40 % C12, 10 % C16) dimethyl benzyl ammonium chloride (ADBAC)
EPA Reg. No. 99503-7Under EPA reviewADBAC manufacturing-use product at 50 %, in EPA review50 %ethanol (SDA 40-B/3-C)
ProductFunctionFamilyActivity · carriers
ENVIROQUAT EQ C15Cocoalkyl methyl bis(polyoxyethylene-15) ammonium chloride
Water-soluble film-forming corrosion inhibitor for cooling loops and hard water95 %neatENVIROQUAT EQ T15Tallowalkyl methyl bis(polyoxyethylene-15) ammonium chloride
Water-soluble corrosion inhibitor for high-conductivity and brine-fed systems95 %neatENVIROQUAT DCE 1214Bis-quat of dichloroethyl ether and C12–C14 dimethylamine
Gemini corrosion inhibitor for recirculating water and piping50 %ENVIROQUAT DCE 810Bis-quat of dichloroethyl ether and C8–C10 dimethylamine
Brine-tolerant gemini corrosion inhibitor for high-salinity systems50 %ENVIROQUAT TOA DQTall-oil imidazoline, ethyl-sulfate quaternary
Film-forming corrosion inhibitor for closed loops and process water75 %Select a carrier, then request the document.ENVIROQUAT TOA MQTall-oil imidazoline, methyl-sulfate quaternary
Film-forming corrosion inhibitor with wetting action for closed systems75 %Select a carrier, then request the document.ENVIROSURF SLSA 30Sodium lauroyl sarcosinate
Corrosion inhibitor for closed-loop and aqueous fluids30 %
ProductFunctionFamilyActivity · carriers
ENVIROQUAT DCE 810Bis-quat of dichloroethyl ether and C8–C10 dimethylamine
Biofilm-dispersant base for penetrant packages; no antimicrobial claim50 %ENVIROSURF DAO 30Decylamine oxide
Low-foam penetrant and hydrotrope for biofilm and deposit dispersants30 %ENVIROSURF C8S 40Sodium caprylyl sulfonate
Hydrotrope that carries penetrant packages into caustic cleaning programs40 %ENVIROSURF CCAPB 30Capryl/capramidopropyl betaine
Low-foam penetrant for high-electrolyte deposit-control packages30 %ENVIROSURF DSCADA 38Disodium cocoamphodiacetate
Alkaline-stable penetrant for organic deposit removal38 %ENVIROSURF DOSS 70 PGSodium dioctyl sulfosuccinate
Rapid wetter that lifts slime and organic deposits from surfaces70 %propylene glycol
ProductFunctionFamilyActivity · carriers
ENVIROSURF DAO 30Decylamine oxide
Low-foam surfactant for RO and UF membrane-cleaning formulations30 %ENVIROSURF C8S 40Sodium caprylyl sulfonate
Low-foam wetter and hydrotrope for alkaline membrane cleaners40 %ENVIROSURF CCAPB 30Capryl/capramidopropyl betaine
Low-foam amphoteric for membrane and heat-exchanger cleaners30 %ENVIROSURF DSCADA 38Disodium cocoamphodiacetate
Alkaline-stable amphoteric for membrane-safe cleaning programs38 %ENVIROSURF SCA 32Sodium cocoamphoacetate
Mild amphoteric compatible with polyamide membranes32 %ENVIROSURF DLSS 32Disodium laureth sulfosuccinate
Mild anionic for low-foam membrane cleaners32 %ENVIROQUAT 2D 50eDidecyl dimethyl ammonium chloride (C10/C10 DDAC)
EPA Reg. No. 99503-5RegisteredRegistered DDAC active for membrane and system sanitization products50 %ethanol (SDA 40-B/3-C)
ProductFunctionFamilyActivity · carriers
ENVIROQUAT 2C 75Dicoco dimethyl ammonium chloride
Demulsifier base for oil–water separation and slop-oil treatment75 %Select a carrier, then request the document.ENVIROQUAT TOA MQTall-oil imidazoline, methyl-sulfate quaternary
Wettability-reversal agent for oily-solids and sludge treatment75 %Select a carrier, then request the document.ENVIROQUAT EQ T15Tallowalkyl methyl bis(polyoxyethylene-15) ammonium chloride
Demulsifier intermediate for produced and process water95 %neatENVIROQUAT 2HT 75Dihydrogenated tallow dimethyl ammonium chloride
Organoclay base for oil removal from wastewater75 %Select a carrier, then request the document.ENVIROQUAT 2D 50Didecyl dimethyl ammonium chloride (C10/C10 DDAC)
Cationic collector and coagulant aid for dissolved-air flotation50 %Select a carrier, then request the document.ENVIROQUAT 2O 80Dioctyl dimethyl ammonium chloride (C8/C8)
Short-chain cationic for flotation and clarification packages80 %Select a carrier, then request the document.ENVIROQUAT OD 80Octyl decyl dimethyl ammonium chloride (C8/C10)
Mixed-chain cationic for flotation and oily-water clarification80 %Select a carrier, then request the document.ENVIROQUAT DTAC 50Dodecyltrimethyl ammonium chloride
Cationic collector for flotation and sludge conditioning50 %isopropanolENVIROSURF DOSS 70 PGSodium dioctyl sulfosuccinate
Wetter for sludge and tank cleanout packages70 %propylene glycol
ProductFunctionFamilyActivity · carriers
ENVIROQUAT CB 80eAlkyl (50 % C14, 40 % C12, 10 % C16) dimethyl benzyl ammonium chloride (ADBAC)
EPA Reg. No. 99503-2RegisteredRegistered ADBAC active for swimming-pool and spa algaecides80 %ethanol (SDA 40-B/3-C)ENVIROQUAT 2D 50eDidecyl dimethyl ammonium chloride (C10/C10 DDAC)
EPA Reg. No. 99503-5RegisteredRegistered DDAC active for pool, pond, and fountain algaecides50 %ethanol (SDA 40-B/3-C)ENVIROQUAT CB 50eAlkyl (50 % C14, 40 % C12, 10 % C16) dimethyl benzyl ammonium chloride (ADBAC)
EPA Reg. No. 99503-7Under EPA reviewADBAC manufacturing-use product at 50 %, in EPA review50 %ethanol (SDA 40-B/3-C)ENVIROSURF DAO 30Decylamine oxide
Low-foam surfactant for pool filter and surface cleaners30 %ENVIROSURF C8S 40Sodium caprylyl sulfonate
Hydrotrope for tile and filter cleaner concentrates40 %ENVIROSURF CCAPB 30Capryl/capramidopropyl betaine
Low-foam amphoteric for spa and pool surface cleaners30 %
Custom synthesis
Need a water-treatment chemistry we don't list?
Custom quats and surfactants to specification for biocide, corrosion, deposit-control, and cleaning programs, from molecular design through pilot-scale production.
What we make to order
- Corrosion inhibitors matched to your water chemistry, conductivity, and dosing method
- Low-foam surfactant packages tuned to membrane compatibility and rinse-out
- Biofilm-penetrant blends built around the bis-quat base
- Registered-active grades and end-use registrations under the regulatory platform
- Concentrated and pumpable grades at the activity you dose
Frequently asked
Which actives can be used as water-treatment biocides?
The registered grades: 2D 50e (DDAC), 2OD 80e (dialkyl blend), CB 80e (ADBAC), and MBEB 80e (dual quat), with 2D 80e and CB 50e in review. Your biocide product is registered on ours under the formulator’s exemption or as a supplemental registration. The unregistered quats on this page are for corrosion inhibition, separation, and formulation.
Are the biofilm penetrants biocides?
No. They are surfactant packages that disperse biofilm and deposits so that a registered biocide or a cleaner can reach the surface; they carry no antimicrobial claim.
Which surfactants are safe on polyamide RO membranes?
The low-foam amphoterics and hydrotroping grades: decylamine oxide, capryl/capramidopropyl betaine, sodium caprylyl sulfonate, disodium cocoamphodiacetate, and sodium cocoamphoacetate. Cationic quats should be kept away from polyamide membranes except as a validated sanitizer.
Can the registered actives be used in pool and spa algaecides?
Yes. Quaternary algaecides for swimming pools, spas, fountains, and ponds are end-use products registered on ADBAC and DDAC manufacturing-use actives; CB 80e and 2D 50e are the registered grades, and the algaecide claims are made on your end-use registration.
Which corrosion inhibitor for hard or high-conductivity water?
The ethoxylated quats (EQ C15, EQ T15) and the bis-quats (DCE 1214, DCE 810) remain soluble and film-forming where conventional quats precipitate; the sarcosinate suits closed loops and aqueous fluids.